I have one of these hand held radios and there is an "E" that is
flashing on the top, left of the screen and it keeps it from accepting
any other key strokes. You can enter a new frequency, but you can not
save it and lock the keyboard.

Any ideas?

Thanks,
Fred Blair
Houston, Tx

At 03:18 04 July 2011, Fred Blair wrote:
>I have one of these hand held radios and there is an "E" that is
>flashing on the top, left of the screen and it keeps it from
accepting
>any other key strokes. You can enter a new frequency, but you
can not
>save it and lock the keyboard.
>
>Any ideas?
>
>Thanks,
>Fred Blair
>Houston, Tx
>
Try a re-set: Turn radio off, press and hold the volume knob and
the Monitor button while turning the radio on. This is advice from
the Vertex VXA300 manual.
Good luck
Phil

On Jul 4, 5:22*am, Philip Jarvis > wrote:
> At 03:18 04 July 2011, Fred Blair wrote:>I have one of these hand held radios and there is an "E" that is
> >flashing on the top, left of the screen and it keeps it from
> accepting
> >any other key strokes. You can enter a new frequency, but you
> can not
> >save it and lock the keyboard.
>
> >Any ideas?
>
> >Thanks,
> >Fred Blair
> >Houston, Tx
>
> Try a re-set: Turn radio off, press and hold the volume knob and
> the Monitor button while turning the radio on. This is advice from
> the Vertex VXA300 manual.
> Good luck
> Phil

My model did have a CPU set sequence a little different than yours,
but you gave me the right clue. Thanks, Fred